1981 Gibson ES 335

Here is Austin, one of our loyal customers, and his sweet 1981 Gibson ES 335. He is the guitarist for a great local rock band called White Denim. They're about to go on tour. and he wanted his axe to bling. We didn't snap any 'before' pictures, but this guitar used to be a cloudy shade of green. After we sanded the top, cleaned the hardware, and buffed the entire guitar, it now shines like the North star. Do your ears a favor, and check out White Denim here.

Custom Walnut Telecaster

Building your own guitar is great for a lot of reasons. Once the instrument is complete, you have a real connection to it - considering that you hand selected everything from the wood to the fret wire. Often you end up with a guitar that is of very high quality, while spending less money than you would for a pre-assembled axe. The downsides are that parts ordered from different companies sometimes don't want to work together. Things that look easy to do yourself usually require an amount of precision that isn't available from the household toolbox. And worse yet, these sort of problems don't usually reveal themselves until deep into the build.

But first, lets pause and marvel at this amazing piece of figured walnut. My fledgling photography skills can't even capture the full 3-D effect going on here. It's heavy piece of wood, but very easy on the eyes and ears. The rosewood fingerboard also has exceptional figure and color. The owner really did a good job selecting wood for this guitar. He brought it to us to cut a bone nut and to perform some fret leveling and final setup. As you'll see, its a shame he didn't have us measure and route the bridge placement as well...

Epiphone John Lennon Signature Partial Re-fret - Episode One

This is an beautiful example of an Epiphone John Lennon signature model that has only been a guitar for about 10 years. It has been played extensively by its owner, and because of his use of a capo, the frets have worn down very quickly. Frets 1 - 8 have deep grooves in them, far too deep to level and re-crown. Contributing to the problem, the fret wire used by Epiphone likely isn't the highest of quality. The Jescar wire we replace it with will last twice as long. So, we'll replace the first eight and then level them into the remaining frets.